Skip to main content
 
 
 
o

OPTIMUM

L'Optimum è un caminetto a legna indipendente dall'aria ambiente, con porta a battente, disponibile in varie configurazioni. È possibile ordinare questo caminetto senza o con pietre di accumulo o giacca di convezione. Ciò che rende speciale l'Optimum sono le numerose opzioni di personalizzazione per la finitura interna, la cornice di finitura e la maniglia della porta. Progettato con un'innovativa tecnologia di combustione per garantire prestazioni ottimali e un'elevata efficienza, questo caminetto è adatto alle case moderne che rispettano le più recenti normative edilizie. L'Optimum incarna la tecnologia all'avanguardia che ci si aspetta da Metalfire.

Image removed.

 

 

 

Optimum closed wood-fired fireplace

 

Supplies

1. fresh air supply (connected below or behind)
2. supply of ambient air
3. primary air supply/combustion air
4. secondary air supply/air wash for glass
5. tertiary air supply/post-combustion
6. flue gas discharge
7. outlet of heated ambient air

Characteristics

A. insulated combustion chamber available with Original, Round, Triangle or Ceramic interior finishes
B. bottom plate in 20 mm flat steel with ashpan and cast iron grate or Ceramic
C. control for air supply (primary, secondary and tertiary air supply)
D. adjustable flue gas baffle plates
E. catalyst 
F. cold door handle
G. adjustable floor support
H. optional finishing frame in 10mm solid steel  

Optimum closed wood-fired fireplace with convection jacket

 

Supplies

1. fresh air supply (connected below or behind)
2. supply of ambient air/convection air
3. primary air supply/combustion air
4. secondary air supply/air wash for glass
5. tertiary air supply/post-combustion
6. flue gas discharge
7. guide for convection air through convection jacket
8. outlet of heated convection air

Characteristics

A. insulated combustion chamber available with Original, Round Triangle or Ceramic interior finishes
B. bottom plate in 20 mm flat steel with ashpan and cast iron grate or Ceramic
C. control for air supply (primary, secondary and tertiary air supply)
D. adjustable flue gas baffle plates
E. catalyst
F. convection jacket
G. cold door handle
H. adjustable floorsupport
I. optional finishing frame in 10mm solid steel      

Optimum closed wood-fired fireplace with accumulation stones

 

Supplies

1. fresh air supply (connected below or behind)
2. supply of ambient air
3. primary air supply/combustion air
4. secondary air supply/air wash for glass
5. tertiary air supply/post-combustion
6. flue gas discharge
7. outlet of heated accumulated air

Characteristics

A. insulated combustion chamber available with Original, Round, Triangle or Ceramic interior finishes
B. bottom plate in 20 mm flat steel with ashpan and cast iron grate or Ceramic
C. control for air supply (primary, secondary and tertiary air supply)
D. adjustable flue gas baffle plates
E. catalyst
F. accumulation stones   
G. cold door handle
H. adjustable floor support
I. optional finishing frame in 10mm solid steel         

OPTIMUM 700-60 Series
 

OPTIMUM 900-60 Series

Enhance your Optimum fireplace with accumulation stones (Optional)

 

Extended heat distribution

The accumulation stone is not just an optional feature; it's an enhancement that improves the way your fireplace distributes heat. By absorbing and storing the excess heat generated during a fire, it gradually releases it into the room, ensuring a more even and consistent temperature for an extended time. This means less reliance on other heating sources.

Cost-effective heating

The use of accumulation stone can lead to cost savings on your heating bills. With the heat stored in the stone, you can enjoy warmth long after the fire has burned out. With stored heat, less wood is needed.

Hinged door system

Our fireplace features a hinged door for effortless access. To open the door, simply place the cold door handle in the slot opening adjacent to the door. Then, gently slide the handle downwards. This secure mechanism ensures a smooth and easy door-opening experience.

Space Efficiency

The hinged door design is notably practical for spaces with limited vertical clearance. Unlike retractable door systems, it doesn't require additional height for the door to slide up. This makes it an excellent choice for rooms with lower ceilings.

Accessibility

The hinged door allows for a wide and unobstructed view of the fire, making it easy to add woodadjust the flames, or clean the interior. It provides a user-friendly experience that is both convenient and visually pleasing.

Experience the benefits of our hinged door fireplace design, where functionality and aesthetics come together seamlessly.

Porta maniglia 

La maniglia è inclusa di serie per facilitare l'apertura e la chiusura della porta. La maniglia è disponibile in tre colori: Nero, Terracotta e Oro Acero.

Alimentazione dell'aria fresca

L'alimentazione di aria fresca può essere regolata utilizzando la maniglia in dotazione. Il massimo apporto di aria per la combustione si ottiene quando la maniglia scorrevole viene spostata completamente a destra.
È preferibile far scorrere la leva completamente a destra quando si accende il fuoco. Quando la legna da ardere è ben accesa, dopo 10-15 minuti, il regolatore d'aria può essere rimesso in posizione centrale.

Se la maniglia è in posizione centrale, il caminetto brucia alla potenza termica nominale. In questa posizione, la combustione e l'efficienza sono migliori quando il camino preleva almeno 12 Pascal.

Spostando la maniglia più a sinistra si riduce l'apporto di aria e quindi la resa del caminetto. Quando si fa scorrere la maniglia più a sinistra dalla posizione centrale, si riduce l'apporto di aria nel caminetto. Quando l'alimentazione d'aria è nella posizione completamente a sinistra, il fuoco nel caminetto si spegne.

Enhanced Heating Options

The possibility of choosing between a ceramic heating bottom or a 20mm steel bottom with a cast iron grate and ash pan is available for the Optimum.

The ceramic material used as the heating bottom is renowned for its exceptional thermal properties. This option is perfect for heat retention and a consistent, extended heating experience. Moreover, the ceramic is an organic material, emphasizing its natural appeal.

On the other hand, the 20mm steel bottom, complete with a cast iron grate and ash pan, offers a distinct set of advantages. The minimalistic steel construction provides durability and strength, ensuring it can withstand high temperatures and the rigors of daily use like the ceramic bottom. The grate and ash pan are thoughtfully designed to facilitate convenient ash removal. This option is ideal for those who favor a more minimalistic fireplace setup combined with effortless maintenance and cleaning.

Flue Pipe Reducer

Metalfire offers the solution for seamlessly adjusting your flue pipe from Ø180mm to Ø150mm. This optional accessory allows you to achieve a perfect fit for your unique installation requirements. Ensure your system is tailored to your needs with this versatile addition.

Positioning the appliance 

The fireplace is equipped with 4 adjustable support feet
The height of the support feet can be adjusted both inside and outside the fireplace.

If the highest position of the support feet is not sufficient, a supporting structure must be built on which the fireplace can be placed. This must be sufficiently solid and stable to support the weight of the stove

Fuel: Wood 

To obtain optimal combustion, the moisture content of the wood should be no more than 15% If this is not the case, the glass will quickly become soiled and appliance will be less efficient. To achieve this moisture content, the wood must be dried for two to three years in a dry well-ventilated place. The most suitable wood types are beechoak and birch.

Each of our fireplaces has an optimal wood load: for Optimum models we recommend 25 cm logs. The use of resinous wood types, chipboard, laminate, treated wood or accelerants is strongly discouraged, as it produces sparks and a short burning time. It also harms your fireplace and the environment. Please consult our manual for detailed instructions per type of fireplace.

Responsible wood burning  

Wood heating can only be economical, healthy and ecological if it is used in the right conditions! Choice of equipment, choice of wood, feeding the stove, maintenance... With these conditions you can reduce the emission of fine particles and other air pollutants, but also increase the efficiency of your combustion.

Increasing combustion efficiency

Reduce emissions of fine particles and other air pollutants to Improve end-user comfort and environment.

Anteriore

  • MF 700-60 WHE 1S
    Energy-label A⁺
    Direct heat output 9,6 kW
    Indirect heat output
    Output 5 - 9,6 kW
    Efficiency 84%
    CO emissions 0,06%
    Fine dust emissions 20 mg/Nm³
    Dati tecnici
    Convection jacket
    Ecodesign ‘22 EU Ecodesign logo
    Defra logo UK
    Catalyst Bluefire logo (flame only)
    Aria Pulita Aria Pulita logo IT
    VKF CH VKF CH logo
  • MF 700-60 WHE 1S A
    Energy-label A⁺
    Direct heat output 9,6 kW
    Indirect heat output
    Output 5 - 9,6 kW
    Efficiency 84%
    CO emissions 0,06%
    Fine dust emissions 20 mg/Nm³
    Dati tecnici
    Pietre di accumulazione Accumulation stones logo
    Convection jacket
    Ecodesign ‘22 EU Ecodesign logo
    Defra logo UK
    Catalyst Bluefire logo (flame only)
    Aria Pulita Aria Pulita logo IT
    VKF CH VKF CH logo
  • MF 700-60 WHE 1S C
    Energy-label A⁺
    Direct heat output 9,6 kW
    Indirect heat output
    Output 5 - 9,6 kW
    Efficiency 84%
    CO emissions 0,06%
    Fine dust emissions 20 mg/Nm³
    Dati tecnici
    Convection jacket
    Ecodesign ‘22 EU Ecodesign logo
    Defra logo UK
    Catalyst Bluefire logo (flame only)
    Aria Pulita Aria Pulita logo IT
    VKF CH VKF CH logo
  • MF 900-60 WHE 1S
    Energy-label A⁺
    Direct heat output 12,9 kW
    Indirect heat output
    Output 7 - 12,9 kW
    Efficiency 83%
    CO emissions 0,05%
    Fine dust emissions 22 mg/Nm³
    Dati tecnici
    Convection jacket
    Ecodesign ‘22 EU Ecodesign logo
    Defra logo UK
    Catalyst Bluefire logo (flame only)
    Aria Pulita Aria Pulita logo IT
    VKF CH VKF CH logo
  • MF 900-60 WHE 1S A
    Energy-label A⁺
    Direct heat output 12,9 kW
    Indirect heat output
    Output 7 - 12,9 kW
    Efficiency 83%
    CO emissions 0,05%
    Fine dust emissions 22 mg/Nm³
    Dati tecnici
    Pietre di accumulazione Accumulation stones logo
    Convection jacket
    Ecodesign ‘22 EU Ecodesign logo
    Defra logo UK
    Catalyst Bluefire logo (flame only)
    Aria Pulita Aria Pulita logo IT
    VKF CH VKF CH logo
  • MF 900-60 WHE 1S C
    Energy-label A⁺
    Direct heat output 12,9 kW
    Indirect heat output
    Output 7 - 12,9 kW
    Efficiency 83%
    CO emissions 0,05%
    Fine dust emissions 22 mg/Nm³
    Dati tecnici
    Convection jacket
    Ecodesign ‘22 EU Ecodesign logo
    Defra logo UK
    Catalyst Bluefire logo (flame only)
    Aria Pulita Aria Pulita logo IT
    VKF CH VKF CH logo

Interior finishing

Original | Triangle | Round

Like the 'Original' vertical cast-iron slats, the 'Triangle' and 'Round' versions exude minimalism. The 'Triangle' cast-iron slats represent a more angular approach to the inside of the fireplace, while the 'Round' cast-iron slats - based on a design by Belgian architect Benoit Viaene - are characterised by gentle curves.

The common denominator is the elegant rhythm in both surfaces, which creates an interesting dialogue with the warm light of the fire. The sleek and refined finish of the 'Original', 'Triangle' and 'Round' versions fits perfectly into any interior (in any fireplace) and is also a real eye-catcher, whether the fire is burning or not.

Ceramic concrete look

In our pursuit of offering you the most diverse and adaptable choices, we like to introduce a captivating variant of the Optimum interior finishes. In addition to its exceptional cast iron design, the Optimum is available in' Ceramic' material with a striking concrete look.

Elevate your fireplace aesthetics

The 'Ceramic' material with a concrete look brings a modern, industrial charm to your space, while still maintaining the high-performance features that define that material. This new variant is designed to not only keep you warm and cozy but also to serve as a stylish centerpiece in your home.

Interior finishing colours

Black | Terracotta 

Though the Standard 'Black' lacquer already offers the most beautiful timeless base for any fireplace, Metalfire add a new color to their cast iron finishes for closed wood-fires.

As the name predicts, 'Terracotta' is a vivid orange-red lacquer, reminiscent of typical Mediterranean sceneries. A constant reminder of the sunniest of settings and a welcome pop of color during darker days. Whenever, wherever, 'Terracotta' oozes pure warmth and abundance.

Exterior finishing colours

Black | Terracotta | Maple gold

Our commitment to personalization extends to the finishing frames and handles for the Optimum. You can select from 'Black', 'Terracotta' or 'Maple gold' for the 10mm finishing frame and removable cold handle. This level of customization ensures that your fireplace is not just a source of warmth but also a reflection of your unique preferences and has the aesthetics to seamlessly integrate with your interior design.

Personalizzazione

Cornice di finitura | Maniglia della porta

Il telaio standard con finitura Metalfire ha uno spessore di 10 mm ed è disponibile nei colori laccati "Black", "Terracotta" o "Maple gold", in modo da poter scegliere la finitura più adatta al vostro arredamento. Anche la maniglia è disponibile in tre colori: Black, Terracotta o Maple gold.

 

But the customization doesn't stop there. Our commitment to personalized aesthetics extends to the cold removable door handle as well. You have the option to customize the door handle in the same colors as the finishing frame, providing the opportunity to create a harmonious look that matches either the interior finish or the frame, adding that perfect finishing touch to your fireplace.

MADE-TO-MEASURE 

Belgian craftsmanship is Metalfire's credo. Every day, the vision of extraordinarily unique fireplaces is put into practice by the expert hands of skilled craftsmen. It creates a unique appeal that by automated production processes simply cannot be imitated.

Metalfire's no limits attitude allows ample possibilities in customization, finishing frames, fireplace concepts, wood storages and extensions. Customization supports the creative vision of the architect or interior designer, all within the imposed standards.

You want it, we create it. Metalfire's motivation to blend into the architecture and the interior of the home as a whole, is what sets us apart from the masses.


Finishing frames (thickness 10 mm) and concepts are available in all our standard finishing colours. For technical support please contact support@metalfire.eu